Wet-laid Chopped Strands

Wet chopped strands are produced from continuous filament strands and are used as raw materials for fiberglass paper and reinfor

Wet-laid Chopped Strands

Introduction

Wet chopped strands are produced from continuous filament strands and are used as raw materials for fiberglass paper and reinforced gypsum . It is suitable for UP and Gypsum .Products produced include wet-laid mat which have found wide use in building materials, petrochemical industry, light industry and in electrical applications. The main applications are battery separators, asphalt felts, gypsum board , etc.

 

Features

 

modest water content

excellent dispersity in water

superb fluidity

excellent dispersity with gypsum

Technical data

 

	Data	Glassfiber type	Chopping length (mm)	Filament diameter (μm)	Moisture content (%)	Combustible content (%)	Application
designation
ECST		E glass	3/6/9/12/18	11/13	10±2.0	0.10±0.05	Wet-laid mat
ECSG		E glass	3/6/12	11/16	10±2.0	0.10±0.05	Gypsum
CCST		C glass	3/6/9/12/18	11/13	10±2.0	0.10±0.05	Wet-laid mat
CCSG		C glass	3/6/12	11/16	10±2.0	0.10±0.05	Gypsum
Mark: 1.Special product could be available based on customers' requirements .2.Reference data only, not for technical specifications.

Packaging

Wet-laid chopped strands from Zhongtian Junda , individual packing in 20 or 25kg plastic bag, and then is packed in a plastic woven bag, or packed in a jumbo bag , then to be placed on a pallet. 40 or 45 bags per pallet .

 

Remark: Pallet dimension(length*width*height)(cm): 112*112*(94/118)

 Storage

Unless otherwise specified, it is recommended to store products in a cool, dry area. The products must remain in packaging material until just prior to their use.

.

Wet-laid Chopped Strands